Selecting a mine mill installation consideration

　　First, venue records: 1. The choice of mine mill should be installed on a solid concrete.

　　2. In order to ensure that the positioning accuracy of each component of the ball mill does not change during use, the basis of the ball mill should be used in the basis of the ball mill.

　　3. Before installation, the basic quality should be checked and requiring concrete to have no defects affecting strength. The number and position of the reserved hole meet the requirements.

　　Second, the precautions for lifting the front ball mill: 1. Refer to the assembly diagram of the rotating member of the cylinder head. 2. For the overall relative position, please refer to the assembly diagram. 3. Refer to the assembly diagram of the main bearing component for specific requirements for the main bearing part. 3. Refer to the assembly diagram of the transmission parts of the transmission part.

　　Selecting the mine mill is divided into a tapered ball mill and a fighter grinder. The appearance is a horizontal cylindrical rotating device, an outer gear, a sprocket or a belt drive, a binocular ball mill. The material is sent into the ball mill through the air shaft through the feeder, and the ball is filled with three different specifications. The rotation of the cylinder produces a centrifugal force to reach a certain height and then decrease, which causes the material's heavy hits and grinding. After the material is rough in the chamber, it is entered by a single layer separator. The chamber is filled with four different sizes of balls to further abrasive materials. The powder is discharged by the discharge screen screen, and enter the vibrating screen machine for grading, and complete the pulverization operation.