How to cool the horizontal ball mill bearings?

　　The horizontal ball mill can be bracketable, and it can also be continuously discharged. The particle size of the material can be freely controlled according to the requirements of the user. It is discharged with flow air with a moving material, and the material is clean, and the discharge speed is fast. Since the wind cooling is used, the ball is maintained at a constant temperature. The device is energy-saving and consuming, and it is easy to operate.

　　The heat generated phenomenon in the bearing site is normal, and the heat of the bearing portion is mainly because the device is working, and the heat generated, but if the bearing portion is overheating, it is not normal. Timely check the horizontal horizontal ball mill, see what the reason is caused, then you know how to cool down if the bearing part is hot?

　　First check the bearing Where is the heat from the part, the heat generated by the bearing portion is heat generated by the mutual friction between the bushing and the journal, the bearing can withstand the temperature of 70 ° C, and if it is higher than this temperature, the bearing portion can be damaged, shortened Bearings use life, and also affect the lubrication of the equipment.

　　When the operation, the circulating cooling water system can be used, and the cooling water is introduced into the bearing portion, thereby achieving cooling, or a cast hole in the spherical watt. Let the cooling water enter the pipe and enter the bearing cooling to cool down.