Teach you how to distinguish a rod mill and a ball mill

The rod mill is substantially the same as the ball mill, but there are three distinctive differences: 1. The rod mill is used as a steel rod having a diameter of 50-100 mm as a grinding medium, and the ball mill is used as a grinding medium. The length of the steel rod is shorter than the cylinder. 25-50mm, often used in carbon-containing 0.8% -1% high carbon steel; the amount of the rod is approximately 35% -45% of the effective volume of the rod mill. When observed with the naked eye, the horizontal surface of the rod is in the cylindrical center. There are about 100-200 m below. 2. The ratio of the rod mill body is generally 1.5-2.0, and the inner surface of the lining plate on the end cover should be a vertical plane. It is an object to prevent and reduce the steel rod from producing confusion, bending and Broken, ensuring that the steel rod moves regularly. The ratio of the length of the ball mill is smaller, and the ratio is only slightly greater than 1.3 in most cases. The rod mill does not use a plaid mine, and the overflow type, open-shaped mine; the diameter of the mineral end It is generally larger than the same specification ball mill. The rod mill cylinder speed should be lower than the working speed of the same specification ball mill, so that the medium within the diarrhea is operated.