Touch the ball mill "crash", how to solve

　　Many customers are reflected in the process of the ball mill, the machine suddenly does not move, stop running, just like a computer - crash, what should I do this time? Don't blindly do some operations blindly, first to do the reason for the "crash" to find the ball mill, then look for the corresponding solution. . Under normal circumstances, it is caused by: 1: Exhaust pipe clogging

　　When the ball mill is inherently exhausted, the object in the rotor and the pipe wall constantly rubbing the tube wall temperature, and increasing increase Materials are easily adsorbed on the pipe wall due to high temperature heating, so that there is more and more material adsorption on the wall, resulting in clogging. For this issue, we only need to use a vacuum machine to blow the debris in the pipe.

　　2: The feed is too fast / too much if the feed end of the feed is too fast or too much, leading to the ball mill "digestive" strike. When excessive filling of materials in the rotor, a large amount of material is blocking the air in the ball mill host, causing the ball mill to work. At this time, we only need to clean the blocked materials in the air, you can return to normal. We must cut off the power when making cleanup work, and do not operate in the event of power-on, so exclusively.