What is the reason for the temperature of the ball mill?

　　The spherical mill has a temperature over high temperature and the weather and component structure have problems in time to resolve the avoidance of avoidance. There is a problem that the problem should be found in time, in time to solve, so that it can improve the production efficiency of the ball mill, and can effectively increase the life of the ball mill. Here is a more detailed reason: 1, how to operate, poor lubricants or inappropriate, lubricating oil is insufficient, bearing wear, and the operating temperature is too high. Should be adjusted to appropriate, replace the appropriate lubricant, and add appropriate lubricants to the appropriate lubricants, replace the bearings, and improve the ventilation environment. 2, the transmission is not fixed, worm wear or injury, bearing wear or damage, bolt, and foreign matter intrusion. The transmission should be fixed, replace the worm wheel, replace the bearing, tighten bolts, remove foreign matter and replace the lubricant. 3, super load carrying, too much lubricant or too much, poor lubricant or inappropriate, excessive oil seal, the discharge shaft is not properly connected to the transmission. It should be adjusted to the appropriate load or select a model, and the appropriate lubricating oil is added according to the instruction, and the oil is discharged to add appropriate lubricants, and the drip drops in the oil seal, adjust to the appropriate position. 4, worm gear overheating, bearing damage, foreign matter intrusion, worm gear, worm excessive wear. Replace or repair, replace the bearing, remove foreign objects and replace the lubricant, replace the worm gear or worm. 5, oil sealing damage, sealing pad damage, too much oil, loose oil is loose, oil standard is damaged. The oil seal should be replaced, replace the gasket, add the appropriate amount of lubricating oil, tighten the oil plug, replace the oil standard. The above is the reason for the fever of the ball mill to everyone, I hope to help everyone.