What is the inspection of energy-saving ball mills before leaving?

　　Although China is the world's largest country, it is still unable to get rid of the destiny of high-end equipment depending on the import. The ball mill is suitable for dust grinding various ore and other materials, which are widely used in different industries such as moisture, building materials and chemicals, can be divided into dry and wet two kinds of grinding methods. Therefore, we must constantly introduce advanced technology and learn to use.

　　Thereby creating a more perfect ball mill. The root cause of this problem is that the independent innovation capacity in my country's mechanical industrial development is weak (explained: single and not strong), unable to effectively support product upgrades.

　　In addition, the government and enterprises pay too much attention to the eyes of the eyes, and they are despised, and they attach importance to industrial production (Produce), despite scientific research; dependent technology introduction, despise. The above unreasonable policy concepts and thinking models have led to small support for the support of the mechanical industry, and each device must carry out strict inspections before leaving the factory (Sales), it is production The manufacturer of energy-saving ball mills, the equipment produced by the manufacturer will strictly check before the factory.

　　The ball mill is different from the mineral mode, can be laminated and overflow type. So today, Xiaobian takes energy-saving ball mills as an example, to tell you what kinds of inspections have been conducted before the factory: properly operate the ball mill, is the premise of ensuring normal operation of equipment. Operate the ball mill correctly, it can also improve the production efficiency of the equipment.

　　So during the operation of the miners, how does the ball worker operate the ball mill correctly?

　　The safety of the equipment: the energy-saving ball mill rotation should be firm and reliable. It is easy to touch the parts that affect personal safety should take appropriate safety measures; there should be no abnormal sound when running, and when the test is charged, the noise should not be more than the specified.

　　1. Energy-saving ball mill

　　2. Energy saving ball mill should generally have a stop positioning device, and the inner diameter of the cylinder is greater than 2700 mm must have a stop positioning device.

　　3. Electrical equipment should comply with relevant provisions.

　　4. The life of the whole machine and the main components must not be lower than the specified.

　　The ball mill is widely used in cement, silicate products, new building materials, refractory materials, fertilizers, black and non-ferrous metallogenicity and glass ceramics and other production industries, dry or wet grinding of various ore and other wear materials. . Check the mechanical and electrical parts before driving, check whether each connection bolt (composition: head and screw composition) is loose; each lubricant lubricationWhether it is normal, whether the transmission is normal, the protective device is intact, whether the electrical instrument is sensitive, the motor carbon brush is in good contact; check the motor, press the start button to start the motor, pay attention to the current change; the grinding machine continuous start should not exceed two Second, the first time and the second time for more than 5 minutes, if the third start, it is necessary to start with the electrician, the fitter is inspected, and can be started;

　　may not be with other equipment, to interlate start to avoid trip locks (zhá); One week, check the device rotation or abruptible, and eliminate; do not allow the station around when starting; after parking, clean up equipment and environmental sanitation to ensure civilized production. The ball mill is widely used in cement, silicate products, new building materials, refractory materials, fertilizers, black and non-ferrous metallogenicity and glass ceramics and other production industries, dry or wet grinding of various ore and other wear materials. .

　　This lubricating oil can not only reduce the wear during the operation of the ball mill (a basic type of component failure), but also take the heat generated by the friction, so that the ball mill operation can be realized. Pay attention to whether the cylinder is slurry, carefully observe whether the current is normal, the water is normal, check the motor and the main axis temperature every half hour, no more than 60 ° C, find the problem in time; Observe whether the hollow shaft, the oil ring is turned oil, whether the temperature of the hollow shaft is normal, if the hollow shaft is hot, it should be immediately taken immediately (refer to the solution to the problem), you should not stop immediately; The shaft, while paying attention to check the oil volume, temperature, temperature, and timing of the lubrication; after normal operation, strictly press the water, give the mine, add steel ball, prohibit overload operation, no more than 15 minutes, To avoid damage to the line; the ball grinding should stop the ore before stopping, after the concentrate is treated, stop water; press the parking button, when there is no notice, first pull down the knife gate, press the stop button, stop the ore, Water. The ball mill is a crushing key device after the material is broken. Engaged in energy-saving ball mills, ceramics (raw materials: non-metallic minerals) ball mills, cone ball mills and other ball mill equipment, with more than ten kinds of ball mill advanced patents (meaning: open letter or public literature) certificate, leading the industryPRODUCE Enterprise, quality quality, perfect after-sales, escort your equipment and production!