Energy-saving ball mill use puzzle resolution

　　Ball mills are also known as conical ball mills, ceramic ball mills, cement (materials: powdered hydraulic inorganic gelation) ball mills, etc. Of course, their use is different. Then the failure and problems that may occur during use during use are more or less. Let's take a look at some of the detail maintenance of the energy-saving ball mill:

　　1. Check the wear of a liner for one month, pay attention to replacement in time, in the abrasion damage.

　　2. Pay attention to the oil supply situation of the oil supply unit, lubrication is not intermittent, and control the temperature of the Bearing is not higher than 60 degrees Celsius (° C). The ball mill is one of the high fine mills widely used in industrial production, and there are many types. The ball mill is different from the mineral mode, can be laminated and overflow type.

　　3. Reduce (Gear) Reducer, Wormlers, etc.), lubrication between the main bearing and the drive gear.

　　The ball mill is different from the mineral mode, can be laminated and overflow type. We recommend using HL-20 (winter) or HL-30 (summer) gear oil. The person familiar with the work and performance of the energy-saving ball mill should be selected to manipulate, maintain and inspect. All institutions and devices (motor, reducer (divided into gear reducer, worm gear, etc.), etc.), etc., the oil supply can supply sufficient oil. Energy-saving ball mills must be operated in the specified direction, otherwise it cannot be discharged or caused (to contribute to to injure).

　　4. Work in the case where the mill does not have a super-load and insufficient supply.

　　5. Stained a grinding medium (approximately one per week) from the in-plane hole to the cylinder should be quantified.

　　6.It is necessary to check the fastening of the liner every other month to prevent the liner from falling off.

　　7. In order to reduce intermittent time, full set of wear parts should be prepared in the library.

　　8. Each of the mill is good. The ball mill is different from the mineral mode, can be laminated and overflow type. The ball mill is suitable for dust grinding various ore and other materials, which are widely used in different industries such as moisture, building materials and chemicals, can be divided into dry and wet two kinds of grinding methods.

　　9. Lubricating oil should be filtered regularly (available 2-3 layers of gauze)

　　10. Special pay special attention to daily maintenance, machine investment production (Produce) should be used to develop strict machineryRepair plan, and effectively implement this plan, ensuring that machines often work in normal conditions, playing its greatest efficiency and extending its service life, in order to improve work efficiency to play a half-time effect.

　　Related Articles: Ball mill price, small ball mill, overflow ball mill, intermittent ball mill, dry ball mill engaged in energy-saving ball mill, ceramics (raw material: non-metallic mineral) ball mill, tapered ball mill and other ball mill equipment for more than 30 years, with advanced patents of ball mills (meaning For: Open letter or public literature) more than ten certificates, leading the industry's domestic ball mill production (Produce) enterprise, quality quality, perfect after-sales, escort for your equipment and production!