Tips: Ceramic ball mill feed device optimization method

　　The ceramic ball mill is the ball mill of the ball is a ball mill made of ceramics. The capacity is small, which is generally suitable for small mass production of product trial, and is another new energy-saving ball mill in China's latest installment technology development and development. The feed device is one of the factors that determine the production of the ball mill. If the material cannot be moved smoothly into the ball mill, the production output of the equipment will also be discounted. The following is some improvement methods for the spherical mill feed device:

　　1. As the problem arising from the feed opening, the most important problem is the following son.

　　2, to increase ventilation, reduce the granularity of the material, and improve the production of the ball mill, the quality is a key step.

　　3. When the feed port is installed, there must be a certain angle to make the material into the effect of gravity, and put an end to the phenomenon of blocking in import.

　　4, to improve the ball mill ventilation, many mechanical companies have made great efforts and exploration in this respect.

　　5. The grinding head of the ball mill is provided with the bonding and increasing abrasive exhaustion, although there is a good effect, but increases the energy consumption of the fan and the processing difficulty of the grinding dust, the most effective way is to improve Ball mill feed port.

　　6. Change the feed of the feed mouth into a cylindrical tanker, so that the central control spiral is made out, and the ball mill has created well ventilated conditions.

　　7. Secure the liner in the lower half of the small ball mill, to increase the wear resistance of the lower material and play a good protective effect on the feed port.

　　8. Import a steel pipe in the feed port, enter the hot air in the appropriate time, reduce the steam in the grinding, reducing the temperature difference of the grinding.