Xiaobian introduces the feed device of the ball mill

　　The feeder is one of the factors that determine the production of production when the ball mill is determined. If the material cannot be moved smoothly into the ball mill, the production production of the equipment will also be greatly reduced. Today, I will learn more about the ball mill feed.

　　There are many factors affecting the output of the ball mill, the feed device is only one, but the improving these unreasonable problems, optimizing the ball mill feed apparatus, and improve the feeding point is necessary to solve the problem. When the ball mill feed port is installed, there must be a certain angle to make the material in the action of gravity, and put an end to the phenomenon that causes clogging in the import. From the problems generated from the feed, the most important problem is the following son. Change the feed of the feed mouth into a cylindrical tanker, so that the central control spiral spike is made, and the ball mill has a good ventilation condition. It is necessary to improve the ball mill ventilation, and many mechanical companies have made great efforts and exploration in this respect.

　　To increase ventilation, reduce the granularity of the material, which improves the production of the ball mill, and is a key step. In the ball mill's grinding, the blower is combined with each other, although there is a good effect, but increasing the difficulty of the wind turbine and the processing difficulty of the grinding dust, the most effective way is to improve the ball mill.

　　Kettlement. In the feed port, a steel pipe is introduced into the body, and the hot air is accessed at appropriate time, reducing the steam in the grinding, reducing the temperature difference of the grinding. The liner is fixed at the lower half of the ball mill cylinder to increase the wear resistance of the lower material and the feed port is well protected.