Do you know what is the impact of the pH of the ball mill?

　　Steel ball is an important part of the ball mill bearings. Do you know what is the impact of the pH? Today, the ball mill manufacturers will introduce you. The mineralulokine is finely effect on the steel ball of the ball mill bearings, and its fixed mass fraction is about 70%. Effect of Write Time to - 0.074 mm content under different acid base value.

　　With the extension of the grinding time, the longer the grinding time, the higher the content, and the corresponding increase is gradually lowered. If the -0.074 mm content of the steel ball is controlled at 80%, the value of the pH of the slurry is 5.15, 5.87, 6.9O, 7.50, 8.05. The working time required to correspond to 6.5O points, 6.47 points, 6.55 points, 6.53 points and 6.46 points. After the research process, it is known that the pH is between 5-9.5 with the same fineness inequel. The grinding time required for the ball mill is basically no change, indicating that the pH value has little effect on the fineness of the steel ball.

　　At different pH, the degree of wear of the ball mill steel ball is different. During the experiment, the mass fraction of the grinding mass was fixed at 70%, and the pH of the slurry was 5.15, 5.87, 6.9O, 7.5O, 8.O5 and 9.32, respectively. Through the experimental results, it is known that the amount of wear of the steel ball is not fixed at a standard per kilogram. When the acid and base value is from 5 to 9.5, the amount of mineral wear per unit mass is generally no change, indicating that the pH value and the amount of wear of the steel ball have not a great effect.