Ball mill must pay attention to evenly feed

　　During the operation, the ball mill must ensure uniform feed, which is critical to the ball mill, which will directly affect the work efficiency of the ball mill. Today we will explore this problem. The so-called uniform feed is referred to whether the amount of mine is stable and the granularity of the ore is constant.

　　If an inappropriate increase to the mine will make the grinding of the grinding product becomes thick, and the amount of sand is increased. The ball mill may cause "swelling belly" phenomenon, and at this time, the sound of the mill is dull and weak, and the grinding effect is lost.

　　At this time, it should be immediately reduced or stopped, and the overflow concentration should be improved, and the mill is returned to the normal operation. If it is insufficient to mine, the amount of mineral particle size is reduced. When the amount of mine is significantly insufficient, the sound of the shock of the liner and the steel ball will occur, resulting in the loss of the abrasive medium and the liner. When the mining is not changed, the increase in granularity increases or becomes a similar phenomenon in which the mine is more or more.

　　Therefore, when the mill is working properly, it must ensure that the mine is uniform and the particle size is uniform, absolutely can't fluctuate too much, and only this can get a good production indicator. (The article is published by the ball mill equipment. The article is for reference only if the ball mill can even give the mine mainly to see the operator's time, and the general fluctuations occur when there is a handover, so it must be carried out in some places. check carefully.

　　To carefully check the mill main bearing and drive bearing, the transmission system of the grace machine and the operation of the mine machine, check if the amount of lubricant oil is sufficient, understand the addition of milling media, understand the reserves of ore in the mine circle, mill row Ore, grading machine overflow and whether it is normal. Only by carefulness can ensure the smooth operation of the ball mill, the production indicator is stable.