How to do a good gold mine mill lubrication?

　　There will be many accessories in the gold mine mill, and there is still a long time, and there will be some wear, rust, etc. in order to protect the accessories, and we must protect the entire equipment. We must do well. This also improves their use efficiency. How to do the lubrication of the equipment?

　　1, the bearing of the brazing axis of the gold mine mill is usually refueling with the butter cup, about every 40-60 min once. The elbow of the thrust plate is dropped with a thickness of oil, which is generally dropped once every 3-4h. 2, before the equipment is started, the elbolar is adjusted to the elbolar pad, and the grease should be added; the lubricating oil in the bearing housing should be 50-70% of the volume, replace each 3 to 6 months. once. When replacing the grease, apply clean gasoline or kerosene to clean the part of the bearing, and should open the housing under the bearing hole, and clean all parts and then replace the new lubricant.3, when the oil pump suddenly fails during the lubrication process, the gold mine mill can be stopped because the swing force is 15-20 min, and it is necessary to use the hand pressure oil to pump the oil to keep the bearing lubricate. Incidents of burnt bearing accidents.

　　4, can be added to the lubricating oil in winter, avoiding lubricating oil solidification, and must do a sealing work after completing the lubricating oil, avoid dust entering so as not to affect the lubrication effect. Pay attention to the oil temperature of the lubricant when working in the gold mine mill, and the oil temperature cannot be too high to control below 60 degrees.

　　5, often pay attention to the lubrication of friction surface in time, ensuring the normal operation of the machine and prolonging the service life of the machine. The appropriate amount of grease is added every 400 hours during the production process; each work is 2000 hours, the spindle assembly is opened to clean the bearing; the new bearing is replaced for 7200 hours.

　　In order to be able to do a good job of lubrication of the gold mine mill, we must choose the lubrication product of the appropriate model when selecting a lubricating oil or a grease, and requires regular Change oil, timely cleaning parts, prevent dust, etc., there is a negative impact on the equipment.