What should I do if the aluminum powder ball mill spindle temperature changes?

　　Aluminum powder, commonly known as "silver powder", silver metal pigment, add a small amount of lubricant with pure aluminum foil, and crushed into squamous powder, and then polished. The aluminum powder is wide in the metal pigment due to a wide range of applications, large demand. More aluminum powder mills are typically used for grinding aluminum powder materials, thereby forming a mineral raw material. However, the equipment is often used in the process of grinding the aluminum powder, which affects the efficiency of the equipment and the quality of the equipment during severe, then when the temperature of the aluminum powder ball is abnormal, what should I do?

　　The shaft temperature increase

　　CAUSE: When the heating temperature of the aluminum powder grinding machine is rising, if the spindle gloss is discovered, there is a gloss, which is due to the local high temperature of the tile, which is caused. The factor is caused by impurities in the oil, and the oil should be changed. If the bearing of the bearing is high temperature. This is due to the adjustment of the tile adjustment, making the tile surface with the hollow axis journal small area, and the static load is caused.

　　Method: When the above phenomenon occurs, the aluminum powder grinder can be joined, check the contact of the spherical watt-back and tiles, if necessary, should be re-grounded and tile back to adjust The heart is coming. At the same time, it is necessary to re-scrape the surface, and the oxide layer is thoroughly scraped off, and the air axis journal in the oil stone polish. Whether the bearing temperature is high or low, it is a damage to the bearing, and the technicians should strengthen inspection and maintenance, to reduce the failure rate of the aluminum powder grinding machine bearing.

　　The axial temperature is low

　　CAUSE: The aluminum powder grinder bearing is too high in the work, and the lubricating oil does not have a Passenger adhesion. . The cooling water of a shaft watt is not smooth; the four-way wattage did not reach the norm, the wadd gap is too small; the amount of oil supply oil from the lubrication oil is low and the viscosity is low, and the oil film cannot be formed; three, the oil quality is poor; five, due to its It is caused by a failure of oil supply lubrication. If the pressure difference is mainly filtering; the safety valve action causes less oil pressure to cause high oil temperature; then the oil pump is leaked or damaged, and it is not pumping oil.Method: Then take the measures such as changing oil, re-scratching, smooth cooling water and maintenance lubrication equipment to solve the treatment, solve the cause of the ball grinding machine bearing temperature.